2.Disconnect the monitor from the VGA card and reconnect it to the bottom connector on the Dxr2 decoder card. Connect the VGA card and the Dxr2 decoder card using the VGA loopback cable provided.

A Sound Blaster compatible audio card is required for connecting to the Dxr2 decoder card. To obtain the high-quality sound reproduction available with Dolby Digital, use a Sound Blaster AWE32, Sound Blaster AWE64, or Sound Blaster Live! See the figure on page 14 for an example installation for theater- quality sound reproduction.

To Dolby Digital (AC-3) audio decoder device

 

 

Dolby Digital (AC-3) S/PDIF

S-Video

 

cable (not included)

 

 

To TV set

TV Out cable

Composite video out

 

 

 

VGA

 

VGA

Loopback

 

card

cable

Note: Refer to Figure on page 3 for details on the location of the Dxr2 decoder card’s jacks and connectors.

Dxr2 decoder card

VGA monitor

To play DVDs on your television monitor, use the TV Out cable to connect the television to the Dxr2 decoder card’s TV Out connector.

To play digital sound from a DVD or CD, connect a Dolby Digital receiver or amplifier to the Dxr2 decoder card using a high-quality RCA cable.

3.Replace the computer cover and reconnect the power cord.

Installing PC-DVD Encore 13