The Dxr2 decoder card fits a PCI expansion slot.
To install the Dxr2 decoder card:
1.Turn off the power to your computer and any connected devices. Disconnect the power cord from the electrical source.
Use slot one or the available slot having the highest priority in your computer for best performance and compatibility. See your computer’s manual for information on expansion slots and their priorities.
Do not force the Dxr2 decoder card into the slot. If it does not fit properly, remove it and try again.
2.Touch a metal surface on the computer to ground yourself and discharge any static electricity.
3.Remove the cover from the computer.
4.Locate a free PCI expansion slot for the Dxr2 decoder card. The relative length and position of the PCI expansion slots are shown in the figure to the right.
5.Remove the metal plate from the expansion slot.
6.Align the Dxr2 decoder card with the PCI slot and press it into the slot as shown. The card must sit firmly inside the PCI slot.
7.Secure the Dxr2 decoder card in the slot by replacing the screw removed with the slot cover.
8.Proceed to “Step 3: Install the Drive in Your Computer. ”
Note: Refer to your computer’s manual for help in locating a slot.
PCI slot
ISA slot
VL slot
B. Fasten the card to
the slot with a screw.
A. Press the Dxr2 decoder card into the slot.
PCI slot
Installing