Creative PCA-6780 user manual 7 PnP/PCI Configurations

3.2.7 PnP/PCI Configurations

NOTE: This “PnP/PCI Configurations” option is setting up the IRQ and DMA (both PnP and PCI bus assignments.

• Init Display First [PCI Slot]

This item is setting for start up Video output from PCI or Onboard device.

• Reset Configuration Data [Disabled]

This item allow user to clear any PnP configuration data stored in the BIOS.

• Resources Controlled By [Auto (ESCD)]

IRQ Resources	This item allows you respectively assign an interrup-
	tive type for IRQ-3, 4, 5, 7, 9, 10, 11, 12, 14, and 15.
DMA Resources	This item allows you respectively assign an interrup-
	tive type for DMA, 0, 1, 2, 3, 4, 5, 6, and 7.

• PCI VGA Palette Snoop[Disabled]

The item is designed to solve problems caused by some non-standard VGA cards. A built-in VGA system does not need this function.

• INT Pin 1~8 Assignment [Auto]

The interrupt request (IRQ) line assigned to a device connected to the PCI interface on your system.

PCA-6780 User Manual 40