Creda Cooker manual Other Notes on Timer Operation

OVEN TIMER OPERATION

OTHER NOTES ON TIMER OPERATION

1.To cancel the Auto Cooking programme before or after auto cooking starts, press the "Cook Period" and "End Time" buttons together, this will return the cooker to the manual operation.

2.When cooking Automatically the "Cook Period" can be checked at any time by simply pressing the "Cook Period" button.

3.When cooking Automatically the "End Time" can be checked at any time by simply pressing the "End Time" button

4.Having set a Cook Period and End Time an electronic device stores the information. The device within the timer will switch the oven(s) on and off at the required time.

5.When setting an Auto Cooking Programme and a mistake is made, to clear:–

(a)Press and hold in the "Cook Period" and "End Time" buttons together to return the cooker to manual operation.

(b)Start the sequence again.

6.If at any time the display shows three flashing zero’s 0.00. It is likely that the electricity supply to the oven has been interrupted. Reset the timer to the correct time of day.

Food in the oven may, therefore, not have been cooked, before serving check food is thoroughly heated and completely cooked.

7.To set each function always press and hold the required function button and at the same time press "+" or "–" buttons.

8.To adjust the pitch of the audible tone, simply press the "–" button while the audible tone is sounding. For example:-

(a)Press and hold the minute minder button.

(b)With the minute minder button still held in, press the "+"button and set one minute.

(c)When the audible tone sounds after one minute, press and release the "–"button, until preferred pitch is set.

(d)Press and release the Minute Minder button to cancel the bleeping.

18