CARE AND CLEANING
TURN OFF THE MAIN SWITCH BEFORE CLEANING.
Before switching on again, ensure that all controls are in the off position.
THE CERAMIC HOB
To reduce the amount of cleaning always ensure that the hob and cooking utensils are clean and dry before use. Regular use of cleaner conditioner is recommended for proper care and protection of the hob surface. Apply conditioner before using the hob for the first time. It contains a mild cleaning agent, so that subsequent applications may clean off soil and apply a protective film at the same time. For stubborn stains or heavy soiling use any of the following materials, and finish off with conditioner.
1.Jif,
2.Special Powder Cleanser.
NOTES:
1.Powder Cleanser – Mineral deposits that are present in hard water, and
some foods, may cause ‘discolourations’ that appear in the form of grey or brown stains. The stains sometimes appear to be in or under the glass surface. If there are some persistent stains after using any of the other recommended cleaning materials, powder cleanser may be applied, following the manufacturer’s instructions. Do not use abrasive cleaners or the powder cleanser on the painted metal framework.
2.Cleaner Conditioner – Regular use of the conditioner will make the surface easier to clean thus ensuring that years of heavy abrasive cleaning do not progressively dull the surface.
CLEANING MATERIALS TO AVOID
1.Plastic or nylon pads e.g. Scotchbrite and Vileda scourers, these may scratch the surface.
2.Household abrasive powders, e.g. Vim.
3.Oven chemical cleaners, aerosols and oven pads.
Caustic cleaners such as these will etch the surface and attack the metal frame.
4.Bath and sink cleaners may mark the surface.
IMPORTANT NOTES
1.If the hob is scratched through accident or misuse, soil that collects will appear as fine brown lines; these are not fully removable but can be made less obvious by the daily use of cleaner conditioner. Cooking performance is in no way affected by scratches on the surface.
2.Pans with aluminium bases should be lifted rather than dragged across the hob surface. This will avoid metal rubbing off the pan onto the glass. Such marks are easily removed by the powder cleanser provided they are not subsequently baked on for long periods at high temperatures.
In the unlikely event of the ceramic hob surface cracking, isolate the cooker by switching it off at the main switch, and contact the nearest service depot, see separate service leaflet. Do not continue to use the cooker until it is repaired.
33
