USING THE CERAMIC HOB
HOB SETTING CONTROLS (A)
TIMER
CAUTION: IF ANY CRACK IN SURFACE BECOMES VISIBLE, DISCONNECT THE APPLIANCE IMMEDIATELY FROM THE SUPPLY.
Under no circumstances should the hob be used with aluminium foil in contact with the hob surface.
The boiling plates are located beneath the circular cooking areas.
DO NOT allow young children near to the appliance when the hob is in use as the surfaces get extremely hot.
OPERATION WHEN USING THE CERAMIC HOB
Step 1 Place the saucepan centrally on the required hob element. Step 2 Turn the required hotplate control knob to the required setting.
Set to:-
Step 3 After use, turn control(s) to their OFF (O) position.
IMPORTANT
WARNING: Extreme caution should be used when cleaning the hot hob.
1.Always clean up any spillage immediately with a clean cloth or a paper towel to avoid unnecessary damage to the hob. Extreme care should be taken to avoid steam burns and hot surfaces when cleaning spillage from the hob.
2.When cooking food that contains sugar (most food) or syrup, use a utensil which is large enough to prevent boil over or spillage. Sugar spillage will permanently damage the hob and therefore should be cleaned off with care immediately. If sugar spillage has occurred, remove it as long as it is still hot with a metal safety razor scraper. This will avoid any damage. NEVER LET IT COOL BEFORE REMOVING.
3.Always ensure that the base of the utensil is dry before placing on the ceramic hob.
19
