Crown IQAMB-5 manual AMB-5 / SMX-6 IQ Mixer/Multiplexer, 5 Crown Bus Wiring for Removable Barrier

AMB-5 /SMX-6IQ Mixer/Multiplexer

3/16 in

(0.48 cm)

Figure 3.4 Four-Terminal Removable Barrier Block Plug

The following examples show how to connect the mixer/multiplexer to other IQ components on the Crown Bus:

Mixer/Multiplexer 1Mixer/Multiplexer 2

1 2 3 4 1 2 3 4

Cable connectors are numbered as they appear from the front.

	PIN	PIN
Input (–)	1	1	Input (–)
Input (+)	2	2	Input (+)
Output (–)	3	3	Output (–)
Output (+)	4	4	Output (+)
		Shield
GND		Optional	GND

Figure 3.5 Crown Bus Wiring for Removable Barrier

Blocks

4-pin Removable Barrier				5-pin DIN Input
Block (Mixer/Multiplexer)				1	5
1	2	3	4	2	4
					3

Cable connectors are numbered as they appear from the front.

	PIN						PIN
Input (–)	1						1	Input (–)
Input (+)	2						2	Input (+)
Output (–)	3						3	GND
Output (+)	4					ld	4	(Not Used)
					hie
				l S
			na
		tio
GND		Op					5	(Not Used)

Figure 3.6 Crown Bus Wiring for 5-pin DIN Input

IQ–AMB-5 / IQ–SMX-6 Reference Manual

Figure 3.7 Crown Bus Wiring for RJ-45 Input

4-pin DIN Output		4-pin Removable Barrier
		Block (Mixer/Multiplexer)
1	4
2	3	1	2	3	4

Cable connectors are numbered as they appear from the front.

	PIN			PIN
GND	1			1	Input (–)
Output (+)	2		2		Input (+)
(Not Used)	3	3			Output (–)
(Not Used)	4	Optional Shield			Output (+)
		4

GND

Figure 3.8 Crown Bus Wiring for 4-pin DIN Output

Figure 3.9 Crown Bus Wiring for RJ-45 Output

Page 13