CONTENTS
| Quick Install Procedure | 5 | ||
1 | Welcome | 8 | ||
| 1.1 | Unpacking | 8 | |
2 Controls, Connectors & Indicators | 9 | |||
3 | Hardware Installation | 10 | ||
| 3.1 | Connecting to a Host Computer | 10 | |
| 3.2 | Connecting to the Crown Bus | 11 | |
|
| 3.2.1 Set the IQ Address Switch | 11 | |
|
| 3.2.2 Connect to the IQ System via the Crown Bus | 12 | |
| 3.3 | Connect the Audio Wiring | 14 | |
| 3.6 | Connect Auxiliary Devices | 14 | |
4 | Operation | 15 | ||
| 4.1 | Hardware | 15 | |
|
| 4.1.1 | IQ Address Switch | 15 |
|
| 4.1.2 | Baud Rate and Parity Switch | 15 |
|
| 4.1.3 | Enable Indicator | 15 |
|
| 4.1.4 | DATA Indicator | 15 |
|
| 4.1.5 | Main Audio Inputs | 15 |
|
| 4.1.6 | Sense Input | 15 |
|
| 4.1.7 | Main Audio Outputs | 15 |
|
| 4.1.8 | Bus Outputs | 15 |
|
| 4.1.9 | Stack Audio Inputs | 15 |
|
| 4.1.10 | Crown Bus Connector | 16 |
|
| 4.1.11 | Crown Bus Ground Connector | 16 |
|
| 4.1.12 | RS232 Serial Port | 16 |
|
| 4.1.13 | Sensing AUX Port | 16 |
4.2Computerized Control and Monitoring
4.2.1 | Manual/Auto Mode | 16 |
4.2.2 | Input Level Monitors | 16 |
4.2.3 | Output Level Monitors | 16 |
4.2.4 | Bus Output Relays | 16 |
4.2.5 | VCA Gain Controls | 16 |
Automatic Mixing Features |
| |
4.2.6 | Gate | 16 |
4.2.7 | Duck Priority | 17 |
4.2.8 | Input Compressor | 17 |
4.2.9 | Auto Level | 17 |
4.2.10 | Output Compressor | 18 |
4.2.11 | Gate Count | 18 |
4.2.12 Ambience | 18 | |
4.3 Crown Local Net | 19 | |
5 Technical Information | 19 |
5.1Audio 19
5.1.1 | Input Section | 19 |
5.1.2 | VCA Sections | 19 |
5.1.3 | Output Section | 20 |
5.1.4 | Level Sense Circuits | 20 |
5.2 Control and Interface Section | 20 | |
5.2.1 | Crown Bus Interface | 20 |
5.2.2 | RS232 Interface | 20 |
5.2.3 | D/A Converter | 20 |
5.2.4 Log Amp and A/D Converter | 20 | |
Page 6 |
|