Section 4
+
UNLEADED GAS | Cub Cadet 2 CYCLE OIL |
1 US. GALLON | + 4.0 FL. OZ. |
(3.8 LITERS) | (118 ml) |
MIXING RATIO - 32:1
Fig.
Oil and Gas Mixing Instructions
Old and/or improperly mixed fuel are the main reasons for the unit not running properly. Be sure to use fresh, clean unleaded fuel. Follow the instructions carefully for the proper fuel/oil mixture.
Definition of Blended Fuels
Today's fuels are often a blend of gasoline and oxygenates such as ethanol, methanol or MTBE (ether).
Using Blended Fuels
If you choose to use a blended fuel, or its use is unavoidable, follow recommended precautions.
•Always use fresh fuel mix per your operator's manual.
•Always agitate the fuel mix before fueling the unit.
•Drain the tank and run the engine dry before storing the unit.
Using Fuel Additives
The bottle of Cub Cadet
Cub Cadet
Oil and Fuel
If unavailable, use a good
For proper engine operation and maximum reliability, pay strict attention to the oil and fuel mixing instructions on the
Thoroughly mix the proper ratio of
NOTE: One gallon (3.8 liters) of unleaded gasoline mixed with one 4 oz. (118 ml) bottle of Cub Cadet
Gasoline is extremely flammable. Ignited Vapors may explode. Always stop the engine and allow it to cool before filling the fuel tank. Do not smoke while filling the tank. Keep sparks and open flames at a distance from the area.
Remove fuel cap slowly to avoid injury from fuel spray. Never operate the unit without the fuel cap securely in place.
Add fuel in a clean, well ventilated area outdoors. Wipe up any spilled fuel immediately. Avoid creating a source of ignition for spilt fuel. Do not start the engine until fuel vapors dissipate.
NOTE: Dispose of the old fuel/oil mix in accordance to Federal, State, and Local regulations.
9