CyberData 11103 manual Device Configuration, 2.2.1Connect Power to the Speaker, Parameter

Installing the Singlewire-enabled Speaker 7

Device Configuration

2.2 Device Configuration

Set up and configure each speaker before you mount it.

CyberData delivers each speaker with the following factory default values:

Table 2-2. Factory Network Default Settings—Default of Network

Parameter	Factory Default Setting
IP Addressing	DHCP
IP Addressa	10.10.10.10
Web Access Username	admin
Web Access Password	admin
Subnet Maska	255.0.0.0
Default Gatewaya	10.0.0.1

a.Default if there is not a DHCP server present.

2.2.1Connect Power to the Speaker

Figure 2-4through Figure 2-6illustrates how to connect power to the Singlewire-enabled Speaker.

2.2.1.1 Singlewire-enabled Speaker to a 802.3af Compliant PoE Switch

Figure 2-4illustrates how to connect the Singlewire-enabled Speaker to a 802.3af compliant PoE switch via a Cat 5 Ethernet cable.

Figure 2-4. Singlewire-enabled Speaker to a 802.3af Compliant PoE Switch

Cat 5 Ethernet cable

802.3af Switch Class “0”

Speaker

Operations Guide 930320C CyberData Corporation