CyberData 11103 manual 10.RTFM Switch, RTFM switch

Installing the Singlewire-enabled Speaker 13

Device Configuration

2.2.4 Confirm the IP Address, Test the Audio, and Check the Volume

2.2.4.1 Reset Test Function Management (RTFM) Switch

When the speaker is operational and linked to the network, use the Reset Test Function Management (RTFM) switch (Figure 2-10) on the speaker face to announce and confirm the speaker’s IP Address, test that the audio is working, and check the volume.

Figure 2-10. RTFM Switch

RTFM switch

To announce a speaker’s current IP address:

1.Press and release the RTFM switch within a five second window.

2.When you hear the IP address announcement, check the speaker volume.

Note The speaker will use DHCP to obtain the new IP address (DHCP-assigned address or default to 10.10.10.10 if a DHCP server is not present).

Note Pressing and holding the RTFM switch for longer than five seconds will restore the speaker to the factory default settings.

Operations Guide 930320C CyberData Corporation