CyberData 11103 manual How to Set the Factory Default Settings, 12.RTFM Switch

Installing the Singlewire-enabled Speaker 15

Device Configuration

2.2.6 How to Set the Factory Default Settings

2.2.6.1 RTFM Switch

When the speaker is operational and linked to the network, use the Reset Test Function Management (RTFM) switch (Figure 2-12) on the speaker face to set the factory default settings.

Figure 2-12. RTFM Switch

RTFM switch

To set the factory default settings:

1.Press and hold the RTFM switch for more than five seconds.

2.The speaker announces that it is restoring the factory default settings.

Note The speaker will use DHCP to obtain the new IP address (DHCP-assigned address or default to 10.10.10.10 if a DHCP server is not present).

Operations Guide 930320C CyberData Corporation