CyberResearch® Displays

CYRAQ™ 21

2.2.1 Rack-Mount Gasket Installation

Installing the CYRAQ in the landscape orientation requires 9U (15.5″) free rack space. Prior to installing the CYRAQ into a rack, the included gasket must be affixed to the mounting plate.

IMPORTANT! Unless requested at the time of purchase, the display is shipped with gasket applied. Skip to section 2.2.2.

However, in certain instances the mounting gasket may be shipped loose to allow for increased installation flexibility in the case of custom applications. This permits customers to then choose which mounting application best suits their environment— panel- or rack-mount. Affixing the gasket to the back of the CYRAQ’s enclosure is recommended for panel mounting applications; while adhering directly to the mounting plate is recommended for rack-mount applications.

The mounting gasket is a critical component to this monitor’s NEMA 4X rating for watertightness—it must be installed correctly to meet this standard. It is also important to note that the rack-mount installation procedure differs from the panel mount procedure. Please read the instructions below carefully before installing the gasket.

1.On a flat surface, orientate the mounting plate as depicted in Figure 2.

2.Arrange the gasket to match mounting plate.

3.Remove adhesive backing from Section A of the gasket.

3NOTE: It’s important to focus on aligning the holes of gasket and mounting plate rather than their respective edges.

4.Align center hole in gasket with center hole on mounting plate, take care not to let other portions of the gasket in Section A touch mounting plate until aligned properly.

5.Carefully align and place the rest of Section A holes, working out from center.

A

Center Hole

Figure 2: Gasket Installation

6.When done, firmly press down and smooth gasket in Section A.

7.Repeat process for each of the other three sides.

CyberResearch, Inc.

13

25 Business Park Drive

P: (203) 483-8815; F: (203) 483-9024

Branford, CT USA

www.cyberresearch.com