CYRAQ™ 21

CyberResearch® Displays

4.2.3 Calibration Routine

1. Click/touch the calibration target seen in Figure 36 to begin calibration routine.

Figure 36: Calibration Target

2. Follow the on-screen prompts to complete calibration process.

Once you have selected the large calibration target from the control panel, the calibration program will begin.

3.As each target is displayed on the screen TOUCH and hold the center of each target as directed by the text located adjacent to each target.

4.Touch the center of each target as accurately as possible.

Hampshire calibration targets have been specially developed to assist you in calibrating your touchscreen as accurately as possible.

5.As each target is displayed, touch and hold the center of each calibration target until it shrinks and the “Hold” text changes to “Release”.

The calibration screen will automatically time out and return you to the control panel if the first point is not touched within 10 seconds. This time-out feature has been added to the calibration program to insure that you can exit the calibration screen in the event that you have a damaged our disconnected touchscreen. This time-out feature may also be configured for other time-out values.

54

©Copyright 2005 CyberResearch, Inc