CYRAQ™ 21CyberResearch® Displays

2.5 VESA Mounting: CVBF/CVBR 21

 

 

 

 

 

 

100 x

 

3 NOTE: These are “Quick Install”

100

 

instructions for a popular style bench-top

 

 

 

 

 

VESA

 

 

 

 

 

 

 

 

 

mount VESA arm. This VESA arm style

 

 

 

 

 

 

 

 

MAY NOT be the mounting choice you’ve

 

 

 

 

 

 

 

 

selected for your CYRAQ. Check the

 

 

 

 

 

 

 

 

documentation accompanying your VESA

 

 

 

 

 

 

 

 

arm.

 

 

 

 

 

 

 

 

1) Disconnect the power, video and

 

 

 

 

 

 

 

 

touchscreen cables.

 

 

 

 

 

 

 

 

2) Secure cranking unit (#1) to bracket

Figure 8: 100 x 100mm VESA Mounting Holes

 

(#2) with at least two bolts (Figure 9).

 

 

 

 

 

 

 

 

 

The use of bolts and bolt position

 

 

 

 

 

 

 

 

depends on thickness of desk. Fully

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

secure bolts with included “T” type

 

 

 

 

 

 

 

 

 

 

 

 

o

 

 

 

hex key.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3) Secure the clamp to the desk/bench

 

 

 

 

 

 

 

 

top Figure 10). This will make

 

 

 

 

 

 

 

 

subsequent installation easier. The

 

 

 

 

 

 

n

 

clamp is capable of securing the arm

 

 

 

 

 

 

 

 

to surfaces 15-100mm thick (30mm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

and up is ideal).

 

Figure 9: VESA Arm Clamp

 

4) Before continuing, remove the screw

 

 

 

 

 

 

 

 

 

 

from the arm’s base using a Philips

 

 

 

 

 

 

 

 

head screw driver (Figure 12).

 

 

 

 

 

 

 

 

5) Carefully place display on the bench

 

 

 

 

 

 

 

 

top with screen facing down, as seen

 

 

 

 

 

 

 

 

in Figure 13.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3 NOTE: The SWC 100 permits 100 x

 

 

 

 

 

 

 

 

100mm VESA monitors and 75 x 75mm

 

 

 

 

 

 

 

 

VESA arms to be used jointly.

Figure 10: Affix Clamp to Benchtop

 

6) Secure the SWC 100 adapter (Figure

 

 

 

 

 

 

 

 

 

11) to the VESA arm.

 

 

 

 

 

 

 

 

Figure 11: SWC 100 Adapter Mounting Plate

20

©Copyright 2005 CyberResearch, Inc