Cyclades PC400 Process Table, PID TTY Stat Time Command, Loading the Configuration File

Cyclades-PC400 Installation Manual

The Process Table

The process table shows which processes are running and is displayed by tying ps -a. An example is given below.

PID	TTY	STAT	TIME	COMMAND
1	?	S	0:05	init
322	?	SW	0:00	[portmap]
3361	tty11	SW	0:00	[login]
11915	pts/0	S	0:00	bash
11926	pts/0	R	0:00	ps -ax

Use the kill command to delete a process. For example, kill -9 3361 would kill the login process above.

Loading the Configuration File

This configuration file (for non-default configurations) should be loaded into the board´s memory with the com- mand:

pc400util -p-f <text file> The options of this command are:

pr400util -<gpsSi-a<updown>> [-d device] [-f <filedefault>] [-t <MMDDYYYYHHMMSSsystem>]

where
-d device	defines the configuration device to be used. The possible values are /dev/ttyCM0 to /dev/
	ttyCM31 where /dev/ttyCM31 is a virtual console than can be accessed using Minicom
	or a similar utility.
-f file	use <file> as the file argument, <default> accepts the default parameters.
-g	upload current board config. to a local file.
-p	download config. from a local file to the board.
-s	get current statistics.
-S	get current status.
-a cmd	set the device Adm UP or Down.
-t time	set date and time on the board

Appendix A - Linux 38