Cyclades PC400 installation manual ∙∙∙

Parameter	Description	Value for T1	Value for E1
		line	line
rx_sensitivity	Sensitivity for reception.	shaul	shaul
companding_mode	There are two options each for T1 and E1 lines. Ask	ulaw	alaw
	the service provider.
signaling_type	Applies when CAS signaling mode is used. Ask the	loops	r2digital
	service provider.
signaling_tone	Applies when CAS signaling mode is used. Ask the	mfr1	mfr2c
	service provider.
country	Choose your country (cas only).	usa	brazil
interfn_1_begin	Logical link parameters
connection_type	Whether the interface will be used for dial-in, dial-out	both	both
	or both.
phone_num	Phone number assigned to channel, if any.	none	301
dsp_profile_id	Number that identifies the profile, defined elsewhere	1	1
	(or default)
interfn_1_end	End of logical link parameters
∙∙∙
interf1_end	End of first interface parameters
interf2_begin	Second interface parameters
∙∙∙
interf2_end	End of second interface parameters
dsps_auto_restart	The number of times the DSP should try to re-load	0	0
	its configuration if requested.
	FIGURE 4.8 RAS DIAL-IN APPLICATION PARAMETERS (CONT.)

Chapter 4 Board and System Configuration 24