Cypress CY2309NZ manual Pinouts, Maximum Ratings

CY2309NZ

Pinouts

Figure 1. CY2309NZ - 16 SOIC-Top View

BUF_IN	1	16
OUTPUT1	2	15
OUTPUT2	3	14
VDD	4	13
GND	5	12
OUTPUT3	6	11
OUTPUT4	7	10
VDD	8	9

Table 1. Pin Description for CY2309NZ

OUTPUT9

OUTPUT8

OUTPUT7 VDD GND OUTPUT6 OUTPUT5 GND

Pin	Signal	Description
4, 8, 13	VDD	3.3V Digital Voltage Supply
5, 9, 12	GND	Ground
1	BUF_IN	Input Clock
2, 3, 6, 7, 10,	OUTPUT [1:9]	Outputs
11, 14, 15, 16

Maximum Ratings

Supply Voltage to Ground Potential	................–0.5V to +7.0V	Storage Temperature	–65°C to +150°C
DC Input Voltage (Except REF)	–0.5V to VDD + 0.5V	Junction Temperature	150°C
DC Input Voltage REF	–0.5V to 7V	Static Discharge Voltage
		(per MIL-STD-883, Method 3015)	>2,000V

Operating Conditions for Commercial and Industrial Temperature Devices

Parameter	Description	Min	Max	Unit
VDD	Supply Voltage	3.0	3.6	V
TA	(Ambient Operating Temperature) Commercial	0	70	°C
	(Ambient Operating Temperature) Industrial	–40	85	°C
CL	Load Capacitance, Fout < 100 MHz		30	pF
	Load Capacitance,100 MHz < Fout < 133.33 MHz		15	pF
CIN	Input Capacitance		7	pF
BUF_IN, OUTPUT [1:9]	Operating Frequency	DC	133.33	MHz
tPU	Power up time for all VDDs to reach minimum specified	0.05	50	ms
	voltage (power ramps must be monotonic)

Electrical Characteristics for Commercial and Industrial Temperature Devices

Parameter	Description	Test Conditions	Min	Max	Unit
VIL	Input LOW Voltage[1]			0.8	V
VIH	Input HIGH Voltage[1]		2.0		V
IIL	Input LOW Current	VIN = 0V		50.0	μA
IIH	Input HIGH Current	VIN = VDD		100.0	μA
VOL	Output LOW Voltage[2]	IOL = 8 mA		0.4	V
VOH	Output HIGH Voltage[2]	IOH = –8 mA	2.4		V
IDD	Supply Current	Unloaded outputs at 66.66 MHz		32	mA

Notes

1.BUF_IN input has a threshold voltage of VDD/2.

2.Parameter is guaranteed by design and characterization. It is not 100% tested in production.

Document #: 38-07182 Rev. *E Page 2 of 6

[+] Feedback