Additional System Resources

CY8C24123

CY8C24223, CY8C24423

Getting Started

System Resources, some of which have been previously listed, provide additional capability useful to complete systems. Additional resources include a multiplier, decimator, switch mode pump, low voltage detection, and power on reset. Brief state- ments describing the merits of each system resource follow:

Digital clock dividers provide three customizable clock frequencies for use in applications. The clocks can be routed to both the digital and analog systems. Additional clocks can be generated using digital PSoC blocks as clock dividers.

A multiply accumulate (MAC) provides a fast 8-bit multiplier with 32-bit accumulate, to assist in both general math and digital filters.

The decimator provides a custom hardware filter for digital signal processing applications including the creation of Delta Sigma ADCs.

The I2C module provides 100 and 400 kHz communication over two wires. Slave, master, and multi-master modes are all supported.

Low Voltage Detection (LVD) interrupts can signal the appli- cation of falling voltage levels, while the advanced POR (Power On Reset) circuit eliminates the need for a system supervisor.

An internal 1.3V reference provides an absolute reference for the analog system, including ADCs and DACs.

An integrated switch mode pump (SMP) generates normal operating voltages from a single 1.2V battery cell, providing a low cost boost converter.

PSoC Device Characteristics

Depending on your PSoC device characteristics, the digital and analog systems can have 16, 8, or 4 digital blocks and 12, 6, or 3 analog blocks. The following table lists the resources available for specific PSoC device groups.

Table 1. PSoC Device Characteristics

PSoC Part

Digital IO

Digital Rows

Digital Blocks

Analog Inputs

Analog Outputs

Analog Columns

Analog Blocks

Number

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CY8C29x66

up to

4

16

12

4

4

12

 

64

 

 

 

 

 

 

CY8C27x66

up to

2

8

12

4

4

12

 

44

 

 

 

 

 

 

CY8C27x43

up to

2

8

12

4

4

12

 

44

 

 

 

 

 

 

CY8C24x23

up to

1

4

12

2

2

6

 

24

 

 

 

 

 

 

CY8C22x13

up to

1

4

8

1

1

3

 

16

 

 

 

 

 

 

The quickest path to understanding the PSoC silicon is by reading this data sheet and using the PSoC Designer Integrated Development Environment (IDE). This data sheet is an overview of the PSoC integrated circuit and presents specific pin, register, and electrical specifications. For in-depth information, along with detailed programming information, refer the PSoC Program- mable Sytem-on-Chip Technical Reference Manual.

For up-to-date Ordering, Packaging, and Electrical Specification information, refer the latest PSoC device data sheets on the web at http://www.cypress.com/psoc.

Development Kits

Development Kits are available from the following distributors: Digi-Key, Avnet, Arrow, and Future. The Cypress Online Store contains development kits, C compilers, and all accessories for PSoC development. Go to the Cypress Online Store web site at http://www.cypress.com, click the Online Store shopping cart icon at the bottom of the web page, and click PSoC (Program- mable System-on-Chip)to view a current list of available items.

Technical Training

Free PSoC technical training is available for beginners and is taught by a marketing or application engineer over the phone. PSoC training classes cover designing, debugging, advanced analog, and application-specific classes covering topics, such as PSoC and the LIN bus. Go to http://www.cypress.com, click on Design Support located on the left side of the web page, and select Technical Training for more details.

Consultants

Certified PSoC Consultants offer everything from technical assistance to completed PSoC designs. To contact or become a PSoC Consultant go to http://www.cypress.com, click on Design Support located on the left side of the web page, and select CYPros Consultants.

Technical Support

PSoC application engineers take pride in fast and accurate response. They can be reached with a 4-hour guaranteed response at http://www.cypress.com/support.

Application Notes

A long list of application notes can assist you in every aspect of your design effort. To view the PSoC application notes, go to the http://www.cypress.com web site and select Application Notes under the Design Resources list located in the center of the web page. Application notes are listed by date as default.

Document Number: 38-12011 Rev. *G

Page 4 of 43

[+] Feedback

Page 4
Image 4
Cypress CY8C24223, CY8C24123, CY8C24423 manual Getting Started, Additional System Resources, PSoC Device Characteristics

CY8C24123, CY8C24423, CY8C24223 specifications

The Cypress CY8C24223, CY8C24423, and CY8C24123 are members of the PSoC (Programmable System-on-Chip) family, which combine a microcontroller with configurable analog and digital blocks. These devices are designed for a variety of embedded applications, offering versatility and performance for developers looking to create custom solutions.

One of the standout features of the CY8C24223, CY8C24423, and CY8C24123 is their programmable analog and digital components. These include operational amplifiers, comparators, and even CapSense technology, enabling touch sensing capabilities. This flexibility allows engineers to configure the chip according to the specific needs of their application, thereby reducing the number of external components required and simplifying PCB design.

The microcontroller core in these PSoC devices is a 16-bit architecture, offering a balance between performance and power efficiency. The CY8C24223 and CY8C24423 variants include higher RAM and Flash memory options, catering to more demanding applications compared to the CY8C24123. This makes them suitable for tasks ranging from simple control operations to more complex computational processes.

A key technology utilized in these devices is the integrated programmable interconnect, which allows for easy communication between the various configurable blocks. This feature significantly speeds up the development process by enabling designers to create custom peripheral setups without the need for extensive coding.

In addition to their hardware features, Cypress provides an intuitive design environment called PSoC Creator. This IDE simplifies the process of configuring the device, allowing developers to drag and drop components into a design schematic and generate code effortlessly. PSoC Creator also includes simulation features, enabling testing and validation of designs before deployment.

The PSoC family is known for its low power consumption, which is crucial for battery-operated devices. The power management features integrated into these models allow for various operational modes, making them energy-efficient and ideal for portable applications.

In summary, the Cypress CY8C24223, CY8C24423, and CY8C24123 are powerful and flexible programmable system-on-chip solutions. With a combination of configurable analog and digital blocks, solid performance specifications, and an easy-to-use development environment, these devices stand out for engineers working on innovative embedded applications across numerous industries. Their low power consumption further enhances their appeal for modern applications, making them a strong choice for designers.