CYS25G0101DX-ATC Evaluation Board User’s Guide
23
10. Schematic Diagram, PCB Layout and BOM (Bill of Material)Figure 17 to Figure 23 in Appendix A shows the schematic diagram of the CYS25G0101DX evaluation board. Figure 17 is the top level
diagram for the schematic diagrams for Figure 18 to Figure 23. Figure 24 to Figure 32 in Appendix B show the PCB layout of each layer
of the CYS25G0101DX evaluation board. The Bill of Material (BOM) of the evaluation board is listed in Appendix C (for LVPECL Tab le
8 to Table 11) and Appendix D (for HSTL Table 12 to Table 15) respectively.
Notes:
1. The operation voltage VCC for the device at the power supply nodes.
2. The operation current drawn by supply VCC at room temperature.
3. Assumes onboard clock option. If external clock (SMA option) is used the current drawn will depend on the termination resistors required for
the external clock.
Table 7. Operation Specification of CYS25G0101DX Evaluation Board
Description Min. Max. Unit Notes
Power Supply VCC 3.135 3.465 V 1
Current IVCC 280 320 mA 2
Clock Power Supply CLKVCC 3.135 3.465 V
Current ICLKVCC 75 90 mA 3
[+] Feedback