Interfaces
Dlink DRO-210i User Guide 13
Port 4 is reconfigured as LAN, the entries configured on WAN2/DMZ earlier will be
displayed in dark grey color in the corresponding feature tables to indicate that these
entries are currently invalid.
Note: When Port 4 is configured as LAN, Load Balancing and Auto Backup f eatures
get disabled as there is only one WAN interface available.

2.2 LAN Interface

The user systems can be connected to the LAN Interface. And the administrator can
configure the router using HTTPS to this LAN Interface IP Address (i.e
https://RouterLANIP). If the administrator uses http://RouterLANIP by mistake, the
router will automatically redirect the Web Browser to use https.
Note: Default LAN Interface IP Address is 192.168.100.254.
Select Interface
LAN to configure LAN Settings as explained below.
LAN Settings
IP Address Enter the IP address of the LAN interface.
Subnet Mask Enter the subnet mask of the LAN interface.
Forgot LAN IP ?
In case the administrator forgets the IP given to the LAN Port, it is possible to open the
Router’s Web Page by pressing the factory default switch and the settings will be restored
back to default settings. T ype https://192.168.100.254. User name is “admin” and
password is also “admin”.

2.3 DMZ Interface

DMZ stands for Demilitarized Zone. The DMZ interface is typically used for connecting
servers that need to be accessible from the outside world, such as e-mail, web and DNS
servers.
Typically, connections from the DMZ are only permitted to the external network, and
hosts in the DMZ may not connect to the internal network. This allows the DMZ's hosts
to provide services to the external network while protecting the internal network in case
intruders compromise a host in the DMZ. For someone on the external network who
wants to illegally connect to the internal network, the DMZ is a dead end.
Web UI