Administration
Dlink DRO-210i User Guide 67
Restart the Device the saved settings.
Restore to Factory
Default Settings
Press this button to restore the factory default settings of the router. On
reboot, the router can be accessed using LAN IP Address 192.168.100.254.
Restart the Device Press this button to restart the router without saving current changes in
the settings.
Caution: After configuring the router, use Save Settings to save the configurations
permanently. Otherwise on reboot, the router would not remember the current
settings.
10.7 Upload/Download
This feature allows the administrator to upload new configuration file, firmware or
certificate to the router. The administrator can configure the device, save the
configuration and download the configuration in cfg format on the local PC.
Subsequently he can upload the configuration file (DRO210.cfg) on the device again
whenever required.
Caution: Ensure that the downloaded configuration is saved with the file name
DRO210.cfg. Only a file of this name will be accepted by the router for configuration
upload.
Select Tools →
→→
→ Upload to configure as explained below.
Update Firmware/Configuration
Update File Select the file using the browse option. The following files can be
provided for upgrade:
upgrade.tar.gz: This is the upgrade file which will be available
from Dlink Technical Support whenever any module or any
feature is changed.
DRO210.cfg: File which contains the entire configuration of
DRO-210i.
cert.der: Certificate File for SSL Configuration
pkey.der: Private Key File for SSL Configuration
Load Configuration
Files to Local Hard
Drive
Click OK to download the DRO-210i configuration file onto the Local PC.
Web UI