Quality of Service
Dlink DRO-210i User Guide 59
Interface
Bandwidth
Enter the upstream bandwidth of the interface.
Default Class ID Enter the default Class ID for the root class. Corresponding class needs to
be added in the class configuration The unclassified traffic will be sent to
the class with this default class ID.
Root ID The Root ID (configured automatically by the de vice when we add a root
class) is displayed. This is the parent class ID of the interface.
Select QoS
HTB Configuration to enter the HTB QoS Configuration. Select Node
as Class to configure the HTB Class Settings.
HTB QoS Configurations
Interface Name Select the interface (LAN, WAN1, WAN2) on which the bandwidth
control is to be added
Node Select the node (Root, Class) to be configured.
HTB Class Settings Displays when Node is selected as Class.
Priority Enter the priority of this node (value should be between 0 and 7). Default
value is 0. Priority field value 0 has highest priority. Classes with the
highest priority will get excess bandwidth first. The priority will be
effective at the leaf classes only.
Guaranteed Rate Enter the Guaranteed bandwidth (value should be between 1 and 100,000
Kbps). This value should not exceed the interface bandwidth. This is the
bandwidth which the class and all its children are guaranteed.
Maximum Rate Enter the Maximum bandwidth (value should be between 1 and 100,000
Kbps). This value should not exceed the interface bandwidth. This is the
bandwidth which the class and all its children are given, when excess
bandwidth is available.
Parent ID Enter the Parent class ID value to which we are adding this child class to.
Class ID Enter the Class ID of the class, which is currently being added.
After entering all the information press the Apply button and the HTB QoS Entries table
will now be displa yed at the bottom of the page. Press Delete button for deleting the
corresponding entry.
Note:
1) The sum of child's guaranteed bandwidth should be less than or equal to the
parent's guaranteed bandwidth.
2) Any child's maximum rate should be less than or equal to it's parent's maximum
rate.
Web UI