Product Specifications
Product Dimensions
Product tolerances: ±1/16” (±1.6 mm), unless otherwise stated
A
Front of open door
B
Front of handle/knobs
C
Front panel
D
Rear of front panel
1” (2.5 cm) 
Backguard thickness
9” (22.9 cm)
Backguard*6” (15.2 cm) 3” (7.6 cm) backguard* backguard*
External handle 
shown, some models have integral handle
(see inside cover)
Product width:
29 15/16” (76.0 cm)
DR30EI[F]S: |
|
|
|
| |
3/8” (9.5 mm) |
|
|
|
| |
DR30E[F]S: |
|
|
|
| |
Full stainless | 35” |
|
|
| |
steel side panels | (88.9 cm) |
|
|
| |
| to |
| DR30ES | DR30EFS | |
| 37” | Dimension | |||
DR30EI[F]S: | DR30EIS | DR30EIFS | |||
(94.0 cm) |
| ||||
3” (7.6 cm) |
| A | 46 1/8” (117.2 cm) | 46” (116.8 cm) | |
partial stainless |
| B | 27 3/4” (70.5 cm) | 27 5/8” (70.2 cm) | |
steel side panels |
| ||||
| C | 25 3/8” (64.5 cm) | 25 1/4” (64.1 cm) | ||
(removable) |
| ||||
|
| D | 23 1/4” (64.1 cm) | 23 1/8” (58.7 cm) |
*See table for compatibility
Available Backguards**
Part Number | Description | Compatibility | |
|
|
| |
ADRB30E03 | 3 Inch | Optional on all models | |
ADRB30E06 | 6 Inch | Standard on models DR30ES, DR30EFS | |
Optional on models DR30EIS, DR30EIFS | |||
|
| ||
ADRB30E09 | 9 Inch | Optional on all models |
**Models DR30EIS and DR30EIFS come equipped from the factory with a flat stainless trim piece in place of a backguard. A backguard may be purchased as an optional accessory. Add an additional 1/16 inch to depth dimensions above when installing a backguard on models DR30EIS and DR30EIFS.
The trim on models DR30ES and DR30EFS are not compatible with a raised vent.
Models DR30EIS and DR30EIFS are compatible with Dacor raised vent models ERV30 and ERV3015. Use only theses specified raised vent models.
4