Dacor 3” Side Panels Removed, 3” Side Panels Installed, Top View - Downdraft ERV30[15] with Slide-In, Self-RimmingInstallation

Installation Specifications

Self-Rimming Installation with Raised Vent Cutout Options (Models DR30EIS and DR30EIFS Only)

Countertop height: 34	3/4” (88.3 cm) min.	•	A self-rimming countertop configuration is required for raised vent installation. On
36	7/8” (93.7 cm) max.		installations with a raised vent, when sliding the range into position, it will stop when
Countertop thickness: 1 5/8” (4.1 cm) max.			the rear of the control panel or side panels contact the notches toward the front of
			the countertop.

•

10” min. (25.4 cm) to any combustibles above counter both sides

The self-rimming installation of the DR30EI[F]S range and ERV30[15] raised vent create a “built-in” look where the range trim overlaps the countertop on both sides and the raised vent trim overlaps the countertop in back. The rear range trim will partially cover the front of the raised vent chassis in back.

Rear wall or	3/8” min. (1.0 cm)
countertop edge
	countertop overhang

(6.7 cm)

27 1/2” (69.9 cm)

2 5/8”

raised vent opening

19

3/4”

24

3/8”

19

3/4”

(50.2 cm)

29 1/4” (74.3 cm)

(61.9 cm)

(50.2 cm)

to

countertop opening

max.

30 1/16” (76.2 cm)

22 3/4”

(57.8 cm)

cabinet opening

below countertop

Notch countertop

t

o width of cabinets

Cabinet face

Countertop front

below countertop

Top View - Downdraft ERV30[15] with Slide-In, Self-Rimming Installation,3” Side Panels Installed

10” min. (25.4 cm)

Rear wall or

3/8” min. (1.0 cm)

to any combustibles

countertop edge

above counter both sides

countertop overhang

(6.7 cm)

27 1/2” (69.9 cm)

2 5/8”

raised vent opening

24

3/8”

22

3/4”

29 1/4” (74.3 cm)

(61.9 cm)

(57.8 cm)

countertop opening

max.

30 1/16” (76.2 cm)*

cabinet opening

below countertop

Notch countertop

t

o width of cabinets

Cabinet face

Countertop front

below countertop

Top View - Downdraft ERV30[15] with Slide-In, Self-Rimming Installation,

3” Side Panels Removed

*To create a “built-in look” on the front of the cabinet, this dimension may be changed to 29 1/4” (74.3 cm), with the width at the notches remaining 30 1/16”. This configuration is only for models DR30EIS and DR30EIFS with side panels behind door removed.

7