6.GEOMETRY

6.1VERTICAL CENTER

1)Set the TV to NOR I mode.

2)Pressing the V-SIZE UP/DOWN KEY, the lower half of the screen is blanked.

3)Adjust the border line of blanked picture coincident with the mechanical center marks

of the CRT using the V-CENTER UP/DOWN KEY.

6.2VERTICAL SIZE

The VERTICAL CENTER adjustment has to be done in advance.

1)Apply a RETMA PATTERN signal.

2)Set the TV to NOR I mode.

3)Adjust the upper part of the picture with the V-SIZE UP/DOWN keys.

6.3VERTICAL SLOPE

The VERTICAL SIZE adjustment has to be done in advance.

1)Apply a RETMA PATTERN signal.

2)Adjust the lower part of the picture with the V-SLOPE UP/DOWN keys.

6.4VERTICAL S-CORRECTION

1)Apply a CROSSHATCH PATTERN signal.

2)Adjust the S-COR UP/DOWN KEY to obtain the same distance between horizontal lines.

6.5HORIZONTAL CENTER

1)Apply a RETMA PATTERN signal.

2)Adjust picture centering with H-CENTER LEFT/RIGHT keys.

5

Page 6
Image 6
Daewoo 14Q1, 21Q2, 21Q1 Geometry Vertical Center, Vertical Size, Vertical Slope, Vertical S-CORRECTION, Horizontal Center