3-13.FEHEADREMOVAL(See Fig.3-20)
Remove one screw | fixing the FE HEAD and |
remove the FE HEAD | from the MAINBASE. |
3-14.REELGEARTOTALASS'Y&CONNECTPLATEREMOVAL(Fig.3-21)
a. Turn over the DECK MECHANISM and remove one POLY WASHER 
from the REEL GEAR POST 
.
b. After separating tab 'B' of the MAINBASE, remove the REEL GEAR TOTAL ASSEMBLY 
from the MAINBASE.
c. Remove the CONNECT PLATE 
from the MAINBASE by pushing it in the direction of the arrow.
NOTE:
When removing the CONNECT PLATE with the F/L RACK installed, take care not to damage or bend the CONNECT PLATE.
After assembling or disassembling the REEL GEAR TOTAL ASSEMBLY, take care not to get OIL, GREASE or other substances on the REEL BELT.
Take care not to deform or break tab "B".
Check the assembly state & the operating state of the REEL GEAR TOTAL ASSEMBLY befor assembling.
After reassembling, check the FF, REW, PLAY and REVIEW MODES and the existence of noise when operating the MODES.
21
