06Manual 22Daitsu ENG 21/12/06 16:17 P‡gina 77
NAMES AND FUCTIONS OF INDOOR UNIT CONTROLS
Panel de control
Lift the front panel to perform control panel settings.
¥ Opening the front panel.
Pull up from two ends of the front panel. Open the panel and lift the panel up to an angle where it remains fixed. Do not lift the panel any further when it stops with a clicking sound.
¥ Closing the front panel.
Lower ends of the front panel, push the ends on both sides. Close the panel firmly.
Temporary
Normaily set this switch to remote control. lf you miss the remote controller or its
batteries are exhausted, set this switch to the Auto/Cool Position for temporary operation.
ADJUSTING AIR FLOW DIRECTION
To automatically swing the air flow direction
Perform this function while the air conditioner is in operation.
Push the SWING button on the remote controller.
¥To stop the function, push the SWING button again.
¥To change the swing direction, push the AIR DIRECTION button.
CAUTIONS
¥The AIR DIRECTION and SWING buttons will be disabied when the air conditioner is not in operation (including when the ON TIMER is set).
¥Do not operate the air conditioner for long hours with the air flow direction set downward during the cooling or dry operation. Otherwise, condensation may occur on the surface of the vertical air flow louver and cause dew dripping.
¥Do not move the vertical louver manuaily. Aiways use the AIR DIRECTION button. lf you move the louver manuaily, it may malfunction during operation.
lf the louver malfunctions, stop the a conditioner once and restart it.
¥When the air conditioner is started immediately after it was stopped, the vertical air flow louver might not move for 10
seconds or so.
ENGLISH
77
