| TROUBLE SHOOTING |
|
|
| Problem | Location to be checked |
|
|
The washer will not | • Is the drain hose kinked or hung too high? |
drain | • Is the drain hose frozen or clogged? |
|
|
Spin malfunction | • Is the laundry unevenly balanced in the tub? |
| • Is the lid closed? |
| • Is the washer on a level surface? |
|
|
Washer will not fill up | • Is the water faucet open? |
| • Is the water pressure too low? |
| • Is the filter in the inlet valve clogged? |
| • Is there any water? |
|
|
Spin malfunction | • Is the power cord firmly plugged in? |
| • Have you blown a fuse or tripped the breaker switch? |
| • Did the water reach the program level? |
|
|
•Do not operate the washer when the water pressure is lower than 0.02MPa or higher than 0.8MPa to avoid damage of the inlet system
•Do not use the washtub as a water container and always to drain water completely
•Close the tap after use
•Unplug the power cord
WIRING DIAGRAM
17