WASH TEMPERATUREHot Water

Hot water will give the best results of cleaning and sanitizing. But it is not suitable for all articles. It is best for sturdy whites and colourfast articles, heavily soiled articles and diapers.

Warm Water

By using warm water, there is less chance of colour loss in articles. Use with light and moderate soils, non-colourfast or dark colours, permanent press, silks, woolens, nylons and acrylic.

Cold Water

Cold water is less effective in cleaning than hot or warm water, but it does minimize wrinkling and colour fading. Use it for washing extra sensitive clothes and for the rinsing of all fabrics.

Energy

You can save energy when washing by following a few guidelines:

1.Heating water accounts for the greatest expense when washing. Save on heating water by using cold rinses.

2.Wash full loads, but do not overload.

3.Select a shorter wash time for lightly soiled articles.

HOW TO USE YOUR WASHER

A.) Determine proper cycle

•Press down the program knob and turn it to the desired function.

•Pull up the program knob to start the wash program.

WARNING:

The program knob can only be turned clockwise when it is pressed down.

B.) To Wash clothesIMPORTANT:

Before using your new washer, make sure the washer cord is plugged into a properly grounded and polarized outlet which has the appropriate voltage (refer to the serial plate). Make sure the washer hoses are connected to the hot and cold water faucets, and that the faucets are turned on. Be sure the drain hose is not kinked and is inserted into a drain. See the INSTALLATION INSTRUCTIONS for details of proper washer installation.

Before using the washer for the first time, wipe out the inside of the washtub with a sudsy cloth.

1.Load laundry and add detergent (refer to section “GENERAL WASHING INFORMATION” for proper detergent usage.

2.Water level, Select water level according to laundry quantity. Refill function allows you to add water during operation (turn the water level knob to RESET and hold for 2-3 seconds. Then turn to the level desired).

3.Wash Choice,

regular mode, press down the WASH CHOICE button. Gentle mode, release the button.

4.Close the lid

The washer will not spin with the lid open.

5.Set WASH/RINSE temperatures

NOTE: If your washer is (permanently installed connected to both a HOT/COLD water supply, the washer will provide a cold rinse in all temperature settings. If your washer is installed under a portable application, connected to a single water supply, the wash and rinse temperatures will be the same. Also refer to the “special note” under portable (single hose) installation.

C.) Timer

Although the washer cycles are automatic, the timer may be reset to lengthen, shorten or repeat a portion of the cycle.

To set or reset the timer, push timer knob in to stop the washer. Hold timer knob firmly while turning clockwise to the setting desired. Pull timer knob out to start the washer.

14