Specifications

HEATING SPECIFICATIONS

Approx. Heating capacity (sq. feet) *		800 – 2,000
Approx. Fuel burn rate per hour **		1.5 – 5 lbs
Hopper Capacity - Traditional Stove / Insert		40 lbs	Approx. Burn time at lowest setting	27 hrs
Hopper Capacity – Bay View	Free Standing	60 lbs	Approx. Burn time at lowest setting	48 hrs
Hopper Capacity – Bay View	Insert / Built-In	40-60 lbs	Approx. Burn time at lowest setting	27-48

*Heating capacity will vary depending on floor plan layout of your home, degree of insulation, and the outside temperature. Fuel size, quality, density and moisture level will also have an effect.

**Pellet size may effect the actual rate of fuel feed and burn times. Fuel feed rates may vary by as much as 20%. Use PFI listed fuel for best results.

DIMENSIONS

24”

28 3/4”

24 3/4”
24”
	6 1/2”
	Exhaust
+
+		17 1/4”
		17 1/4”
Air Inlet	8 1/4”	12 3/4”

Shroud 1”
12 1/4”	10 3/4”	24 3/4”
		24”
			6 1/2”
	18 3/4”		Exhaust
	3 ½”	+
	3 ½”	+	7 3/4”
	24”	Air Inlet	8 1/4”
		Air Inlet

Traditional Freestanding

Traditional Insert / Built-In

24”	26”			Shroud 1”
24”	25”			Shroud 1”
	25”
				12 1/4”	10 3/4”			26”
				12 1/4”	10 3/4”			24”
								24”
	30”		7”		Ad justable
	30”		Exhaust		Ad justable
		+			Hopper	19”			6 ½”
						19”			6 ½”
						-			Exhaust
	+					-			Exhaust
	+			17”		23”		+
				17”
			8 1/4”	12 3/4”			3 ½”
	Air Inlet		8 1/4”				3 ½”	+	7 3/4”
	Air Inlet							+	7 3/4”
				24”				Air Inlet	8 1/4”
								Air Inlet

Bay View FreestandingBay View Insert / Built-In

ELECTRICAL SPECIFICATIONS

Electrical Rating	=	110-120 Volts 60 HZ 2.0 Amps
Watts (operational)	=	175 (approximately)
Watts (optional igniter)	=	475 (approximately)

A voltage surge protector or ground fault outlet is required for this unit.

EPA COMPLIANCE

This heater is exempt from EPA Phase II requirements, but has been tested for emissions using EPA test methods by Warnock Hersey , US.

FUEL CONSIDERATIONS

Your Pelpro pellet appliance, is designed to burn pellets that comply with Association of Pellet Fuel Industries standards. (Minimum of 40lbs density per cubic ft, ¼ to 5/16’ diameter length no greater than 1.5”, not less than 8,200 BTU’s/lb, moisture under 8% by weight, ash under 1% by weight, and salt under 300 parts per million) Pellets that are soft, contain excessive amounts of loose sawdust, have been or are wet, produce clinkers and/or heavy ash will result in reduced performance and may actually cause the fire to go out.

Canadian Comfort Industries V04	6	PELPRO OWNERS MANUAL
Copyright 2004	www.pelprostoves.com	Dansons Group Inc.

IPP Bay View Insert / Built-In, FPP, IPP, FPP Freestanding, IPP, FPP specifications

Dansons Group is renowned for its innovative approach to outdoor and indoor heating solutions, especially with their FPP Freestanding and IPP Bay View Insert/Built-In models. These products are designed to cater to the diverse needs of homeowners seeking both functionality and aesthetics in their heating appliances.

The FPP Freestanding model is a perfect blend of traditional charm and modern technology. It serves as an impressive centerpiece in any setting, providing warmth and ambiance to any space. One of its standout features is its large viewing area, which allows for an unobstructed view of the flames, creating a cozy and inviting atmosphere. It is equipped with advanced combustion technology that ensures efficient burning, maximizing heat output while minimizing emissions. This model is also designed to accommodate a range of fuel options, including wood and pellets, giving users the flexibility to choose what works best for them.

On the other hand, the IPP Bay View Insert/Built-In model offers a seamless integration into existing fireplaces or as a built-in feature in new constructions. This model emphasizes both performance and aesthetics, providing a sleek finish that enhances any room's decor. One of the key technologies in the IPP is its advanced blowers and distribution system, which efficiently circulates heat throughout the space, ensuring even warmth without hot spots. Additionally, the IPP incorporates a unique air-wash system that keeps the glass clean, allowing for a clear view of the flickering flames.

Both the FPP and IPP series prioritize ease of use and maintenance. They are designed with user-friendly controls that allow for easy operation and customization of heat settings. Moreover, Dansons Group emphasizes safety, incorporating features such as automatic shut-off mechanisms and cool-touch exteriors to prevent accidental burns.

In summary, the Dansons Group FPP Freestanding and IPP Bay View Insert/Built-In models stand out for their combination of aesthetic appeal, technological advancement, and user-friendly features. Whether you're looking for a statement piece or a practical heating solution, these products are designed to create a warm ambiance while ensuring efficiency and safety.

Dansons Group FPP Freestanding, IPP, FPP, FPP, IPP, IPP Bay View Insert / Built-In Specifications

Models: IPP Bay View Insert / Built-In FPP, IPP FPP Freestanding IPP, FPP

SPECIFICATIONS