BUILT-IN INSERT INSTALLATION
CAUTION: DO NOT BLOCK VENT OPENING
The PELPRO Insert may be framed directly into a wall as either a horizontal or vertical vent installation see (figure 27, 28). The exhaust installation requirements are the same as for a freestanding stove. Refer to “Installing your Freestanding Stove” for information concerning installation and proper
NOTE:
Dimensions that will be enclosed within the frame work are:
Shroud 1”
Shroud 1”
12 1/4” | 10 3/4” | 24 3/4” |
|
|
| 24” |
|
|
|
| 6 1/2” |
| 18 3/4” |
| Exhaust |
| 3 ½” | + | |
| + | 7 3/4” | |
|
| ||
| 24” | Air Inlet | 8 1/4” |
|
|
|
12 1/4” | 10 3/4” |
| Ad justab le |
| Hopp er |
| 19” |
| - |
| 23” |
| 24” |
| 26” |
| |
| 24” |
| |
|
| 6 ½” | |
|
| Exhaust | |
3 ½” | + | ||
+ | 7 3/4” | ||
| |||
| Air Inlet | 8 1/4” | |
|
|
Traditional Insert / Built-In
Bay View Insert / Built-In
Horizontal Vent Installation
Exterior Wall
This example shows the exhaust venting out and up vertically
Requires Spacer Kit
The framed opening for this
Installation needs to be:
| Tradition | Bay View |
Height | 21” | 21 - 25” |
Width | 30” | 30” |
Depth | 17” | 17” |
If constructing a chase, adequate Insulation, vapor barrier, drywall, And caulking must be used.
FIGURE 27
2’
10’
| Wood Frame | |
8” | Construction | |
| ||
| 3” minimum | |
| air gap | |
| 2” Min. | |
18” | Air gap | |
Wall Band / | ||
Shroud | ||
Support Brkt | ||
| every 5’ | |
6” | 6” | |
| ||
4 | Clean Out Tee | |
|
Wood Surround
Stand Offs
Part
Canadian Comfort Industries V04 | 20 | PELPRO OWNERS MANUAL |
Copyright 2004 | www.pelprostoves.com | Dansons Group Inc. |