INSTALLATION CHECK LIST
Unless you are knowledgeable and experienced in stove installation, we recommend your PELPRO stove receive a
COMPLETE THIS CHECK LIST PRIOR TO LIGHTING YOUR FIRST FIRE:
_____ | Carefully read this "Owner's Manual”. SAVE THIS MANUAL. |
_____ | Obtain final inspection and approval by local building officials. |
_____ | Carefully clean all marks off the brass parts before the first fire is lit. Use a soft cloth and a gentle type |
| cleaner. Caution: Never use an abrasive cleaner on any part of your stove. |
_____ | Polish the hopper to remove the oil type coating used in manufacturing. |
_____ | Have your local Dealer demonstrate all the operational, cleaning and maintenance steps necessary |
| for your stove. |
_____ Sign and keep a copy of the
| “Dansons Certified Installer”, found inside our appliance or available online. |
| Register online at www.dansons.com/support for Extended Warranty. |
______ | Register your purchase online at www.dansons.com/support. |
_____ | Fill the hopper with quality pellets to prime the unit; Using the CCI “AcuTron”, (figure 5), PUSH the |
| FEED RATE Touch Pad and this will start the auger and the combustion fan. |
NOTE: Do not attempt to light a fire at this time. Leave the START / FEED RATE [ON] for 2 to 5 minutes until pellets start dropping into the burn grate. Then touch the OFF pad to turn off system . The auger is now primed to deliver fuel to the burn grate (figure 6). Then light the stove according to the directions outlined in "LIGHTING YOUR STOVE",
Heat Tubes | Hopper | |
| ||
Tube Scraper | Auger | |
| ||
Window | Auger Motor | |
| ||
Burn Grate | Fan Motors | |
Exhaust | ||
Burn Pot | ||
Air Intake | ||
| ||
E Z Clean | Ash Pan | |
Grate |
CCI |
| Cutaway View |
Figure 3 |
| Figure 4 |
Canadian Comfort Industries V04 | 9 | PELPRO OWNERS MANUAL |
Copyright 2004 | www.pelprostoves.com | Dansons Group Inc. |