Dantax 32LCD V9 manual Switching the TV On/Off, Input Selection, To Switch the TV On

Switching the TV On/Off

To Switch the TV On

•Connect the power cord to the 220-240V AC, 50 Hz.

•Press STANDBY button. Then the standby LED lights up.

•To switch on the TV from standby mode either:

•Press the button, P+ / P- or a numeric button on the remote control.

•Press the -P/CHor P/CH+ button on the TV. The TV will then switch on.

Note: If you switch on your TV via PROGRAMME UP/DOWN buttons on the remote control or on the TV set, the programme that you were watching last will be reselected.

By either method the TV will switch on. When the TV is operated for the first time, the following screen appears:

To Switch the TV Off

•Press the button on the remote control or STANDBY button on the TV, so the TV will switch to standby mode.

•To power down the TV completely, unplug the power cord from the mains socket.

Input Selection

Once you have connected external systems to your TV, you can switch to different input sources.

•Press AV button on your remote control for directly changing sources.

or,

•Select “Source” option from the main menu by using or button. Use then or button to highlight an input and press button to select.

Auto Program

Country

Language

TXT Language

PLEASE CHECK ANTENNA CABLE

AUTO. PROGRAMMING SYSTEM

Ok

UKCancel

By pressing “” or “ ” button, adjust the Country item and press “” to highlight “Language” item. Use “” or “ ” button to set “Language”. Use “” or “” buttons to select “TXT Language” and set it by using ” or “ ” buttons. Press “OK” button to continue.

SOURCE

TV

EXT-1

EXT-2 EXT-2 S

BAV

English - 17 -

01-ENG-32761W-1055 UK-32 INCH-17MB12-(17HDMI-3D PAN-BASIC PIP-WO SVHS)-50133726. 04.09.2008, 08:27