PC Mode Menu System
See “Connecting the LCD TV to a PC” section for connecting a PC to the TV set.
For switching to PC source, press AV button on your remote control and select PC input. You can also use “Source” menu to switch to PC mode.
Note that PC mode menu settings are available only while the TV is in PC source.
Sound Menu
The items in this menu are described at “Sound Menu” section explained in “Analogue TV Menu System”.
Feature Menu
Feature menu settings are identical to the settings explained in “Feature Menu” section in “Analogue TV Menu System”.
PC Picture Menu
For adjusting PC picture items, do the following:
Press 
/ 
button to select the first icon. PC Picture menu appears on the screen.
Brightness, Contrast and Colour Temperature settings in this menu are identical to settings defined in TV picture menu under “Analogue TV Menu System”.
PC Position Menu
Select the sixth icon by pressing 
/ 
button. PC Position menu appears on the screen:
PC POSITION
Autoposition
H Position
V Position
Phase
Dot Clock
Autoposition
If you shift the picture horizontally or vertically to an unwanted position, use this item to put the picture into correct place automatically. This setting therefore automatically optimizes the display.
Select Autoposition item by using 
or 
buttons. Press OK button.
Warning: Please ensure auto adjustment is performed with a full screen image to ensure best results.
H (Horizontal) Position
This item shifts the image horizontally to right hand side or left hand side of the screen.
Select H Position item by using 
or 
button. Use 
/ 
button to adjust the value.
V (Vertical) Position
This item shifts the image vertically towards the top or bottom of the screen.
Select V Position item by using 
or 
button. Use 
/ 
button to adjust the value.
Phase
Depending on the resolution and scan frequency that you input to the TV set, you may see a hazy or noisy picture on the screen. In such a case you can use this item to get a clear picture by trial and error method.
English - 27 -
