Dantax LR-6500 manual Video jack, Component jack, Video convert

Connections

VIDEO COMPONENTS

	DVD PLAYER				VIDEO PROJECTOR
AUDIO	COMPONENT				COMPONENT
OUT	VIDEO OUT	DIGITAL	VIDEO	S-VIDEO	VIDEO IN	S-VIDEO
R L	Y CB/PB CR/PR	OUT	OUT	OUT	Y CB/PB CR/PR	IN

R	L	R	L
IN		OUT		OUT	IN	IN OUT
	AUDIO			VIDEO		S-VIDEO
				VCR

VIDEO, S-VIDEO , COMPONENT JACKS

There are 3 types of video jacks on the rear panel.

VIDEO jack

The video signal for the VIDEO jacks is the conventional com- posite video signal.

S-VIDEO jack

The video signal is separated into luminance (Y) and color (C) signals for the S-VIDEO jack. The S-VIDEO signals enables high-quality color reproduction. If your video component has an S-VIDEO output, we recommend to use it. Connect the S- VIDEO output jack on your video component to the S-VIDEO input jack on this unit.

Component jack

Make component video connections to a TV or monitor with component inputs to produce higher quality video images. Use a component video cable or 3 video cords to connect the com- ponent video out jacks on the LR-6500 to the monitor.

Video convert

The input signals S-video are converted video signals can be output.

Priority is given to S-VIDEO jack when having input by VIDEO and S-VIDEO jack from the same source.

Notes:

•Be sure to connect the left and right audio channels properly. Red connectors are for the R (right) channel, and white con- nectors are the for L (left) channel.

•Be sure to connect the inputs and outputs of the video sig- nals properly.

•If you connect the S-VIDEO or component signal to the S- VIDEO or component jack on this unit, it is not necessary to connect the conventional video signal to the VIDEO (compos- ite) jack. If you use both video inputs, this unit gives priority to the S-VIDEO signal.

•Each type of video jack works independently. Signals input to the VIDEO (composite) and S-VIDEO jacks or component are output to the corresponding VIDEO (composite) and S-VIDEO or component jacks, respectively.

•You may need to setup the digital audio output format of your DVD player, or other digital source components. Refer to the instructions of the each component connected to the digital input jacks.

•There is no Dolby Digital RF input jack. Please use an exter- nal RF demodulator with a Dolby Digital decoder to connect a video disc player which has a Dolby Digital RF output jack to the digital input jack on this unit.

- 10 -