Dantax LR-6500 manual Distance Adjust

System Configuration

•SPEAKER SIZE MODE LEFT/RIGHT

LARGE: Select this when large front speakers are con- nected. Front channel materials are sent to the front speakers at full range. When this setting is selected, less bass signal is sent to the sub-woofer. Only use this setting if you have adequate sized bass drivers in your front speakers.

SMALL: Select this when the front speakers are rather small. When "SMALL" is selected, SUBWOOFER is set to "SUB" automatically, and bass frequencies of the front channels are output from a subwoofer. So a powered sub- woofer is indispensable for this setting.

CENTER

LARGE: Select this when a large center speaker is con- nected. Center channel is output at full range.

SMALL: Select this when the center speaker is rather small. Bass frequencies are output from a subwoofer.

NONE: Select this when no center speaker is connected. The center channel will be output from front speakers.

SURROUND

LARGE: Select this when an external power amplifier and large surround speakers are connected. Surround chan- nels are output to the surround speakers at full range.

SMALL: Select this when the surround speakers are rather small. Bass frequencies are output from your pow- ered subwoofer.

NONE: Select this when no surround speakers are con- nected.

SURR BACK

LARGE: Select if the surround back speakers are large sized.

SMALL: Select if the surround back speakers are small sized.

NONE: Select if the surround back speakers are not con- nected.

SUBWOOFER

LFE: Select if a subwoofer is connected to the LR-6500, you have the option to have the front left/right "main"speakers reproduce bass frequencies at all times, and have the subwoofer operate only when the LR-6500 is being used with a digital source that contains a dedicated Low-Frequency Effects, or LFE, soundtrack. This allows you to take advantage of the special bass created for cer- tain movies.

LFE+FRONT: Select if a subwoofer is connected and you wish to use it for bass reproduction is conjunction with the main front left/right speakers, regardless of the type of program source of Surround mode you are listening.

NONE: Select if no subwoofer is connected to this unit. All bass information will be routed to the front left/right speakers.

• SPEAKER CROSS OVER MODE

SPEAKER SETUP

MODE	: SPK CROSS OVER
LEFT/RIGHT	: 100Hz
CENTER	: 100Hz
SURROUND	: 100Hz
SURR BACK	: 100Hz
LFE	: LEFT/RIGHT

BACK TO MAIN MENU

The factory default setting for all speaker positions is 100Hz. If that setting is acceptable for all channels, then no adjustments are needed and you may skip this section. However, should you wish to change one of the settings. The available choices at which point low-frequency infor- mation will be sent to the subwoofer, rather than to the main speaker channel, are 40Hz, 60Hz, 80Hz, 100Hz, 120Hz and 200Hz.

EDISTANCE ADJUST

DISTANCE ADJUST

FL	: 3.0	M	SBR	: 3.0	M
CEN	: 3.0	M	SBL	: 3.0	M
FR	: 3.0	M	SL	: 3.0	M
SR	: 3.0	M	SUB	: 3.0	M

DELAY RESET : OFF

UNIT : METER

BACK TO MAIN MENU

Due to the different distances between the listening posi- tion and each speaker position, the amount of time it takes for sound to reach your ears from each channel is different. You may compensate for this difference through the use of the delay settings to adjust the timing for the speaker place- ment and acoustic conditions in your listening room or home theater.

NOTE

Once the DELAY ADJUST menu is on-screen, note that default for distance settings is in meter. If your measure- ments are not in meter, change to feet at the UNIT line.

- 26 -