Dantax LR-6500 manual Control Functions Basic Operations

Control Functions Basic Operations 1

27DELAY

-Press this button to begin the process for setting the delay times used LR-6500 when processing surround sound or to compensate for video-to-audio delays caused by the use of digital sources or video displays.

SET UP

-Enter or exit the system setup menu. (DVD only)

28ENTER

Press to enter setting.

29DIGITAL

-Press this button to assign one of the digital inputs to a source

MENU

-Access the menu on a DVD disc. (DVD only)

30OSD

-Press this button to activate the ON-Screen Display(OSD) system used to set up.

-Select to NTSC or PAL (press this button for more than 3 seconds).

31VOL (^/v)

Press to adjust volume.

32MUTE

Press to activate the mute function.

3

SOURCE SELECT VOLUME

STANDBY/ON MENU ENTER

DIGITAL

1Press the STANDBY/ON button.

2Select a source by pressing the SOURCE (5/b) button repeatedly.

DVD

CD

TUNER

TAPE

7.1CH DIRECT IN VIDEO 1 VIDEO 2

AUX 1

3Press DIGITAL button and press the 5orb button repeatedly to select one of the digital inputs or the ana- log input for any source.

or

1.Press the MENU button on the front panel.

2.Each time the SELECT(5orb) button is pressed until "DIGITAL INPUT" displayed on the front panel.

3.Press the ENTER button.

4.Each time the SELECT(5orb) button is pressed to select you desired input.

4Play the source, and gradually turn up the volume to the required level with the VOLUME control.

- 16 -