Dantax LR-6500 manual Input the distance from your listening position

Speaker Configuration

TEST-T VOLUME

CH. ENTER DELAY

Input the distance from your listening position

1Press the DELAY button to "FRONT L DISTANCE" appears on the front panel's display.

2Press the ENTER button. "FRONT" appears on the display.

3Press the tbutton.

"FRONT L 3.O M" appears on the display.

4Press the 5/b buttons to change the setting.

Input the distance from your listening position to front speakers.

You can change the setting from 0.0 to 9.0 M.

5Press the ENTER button.

6Press the 5button.

The next configuration (CENTER DISTANCE) appears on the display.

Repeat step 2 to 6 to change the setting for center and surround speakers.

When all the configurations have been finished, press the DELAY button (or leave the unit for 8 sec- onds) to exit the Delay Adjust mode.

Balancing relative volume between speakers using Test Tone

The test tone function is useful to adjust the relative volume between speakers.

Once the balance is set, you don't have to change the bal- ance as long as the speakers aren't moved.

1Press the TEST-T button.

The test tone is emitted from each speaker in the follow- ing order at 2-second intervals.

FL(Front Left) CEN(Center) FR(Front Right)

	S-W	SL	SBL	SBR	SR
(Sub Woofer)		(Surround Left)	(Surround Back Left)	(Surround Back Right)	(Surround Right)

2Adjust the volume to the normal listening level.

3Adjust the volume of each speakers so that the test tone from each speakers sounds the same.

The level of the speaker which is emitting the test tone can be changed by pressing the 5/bbuttons.

<The level can be adjusted in 1 dB steps from -10 dB to +10 dB.

4When the setting has been finished, press the TEST-T button to stop the test tone.

Output Level Adjustment (Balancing rela- tive volume between speakers)

1Press the CH. button.

"FRONT L LEVEL" (Level of Front Left) appears on the dis- play.

2Press the ENTER button.

"FL LEVEL 0 dB" appears on the display.

3Press the 5/bbuttons to change the setting.

The level can be adjusted in 1 dB steps from -10 dB to +10 dB.

4Press the ENTER and press the 5button.

The next configuration (CENTER LEVEL) appears on the display.

Repeat step 2 to 4 to change other settings.

When all the configurations have been finished, press the CH. button (or leave the unit for 10 seconds) to exit the CH Level Adjust mode.

- 20 -