RHINO-NET™
3
Figure 24 - Safe Setup Second Mask
This applet contains terminal and barcode scanning configuration parameters in a directory
tree structure. The available parameters are divided into two groups: Reader Parameters and
Scan Parameters.
Each Scanner Setup screen window corresponds to a branch of the tree, and the name of
the current branch is displayed at the bottom of each screen window.
Figure 25 - Scanner Setup Window
The screen format shows two columns where the left column indicates branches or
parameters. Branches have three dots in the right column (...). You can navigate through the
tree structure using the keyboard arrows directly on the item field or from the menu.
Parameters have their corresponding current values in the right column. You can edit
parameter values using the keyboard arrows directly on the item field or from the menu. To
change a value for example, select the line of the value to be changed, choose Edit from the
Parameter Menu then choose a new value from the values listed in the dialog box that
appears.
To activate a new configuration select the File ->Save Menu to send the new configuration to
the barcode decoding software and save the new configuration. This will save the
configuration to non-volatile memory preventing loss at the next system reset.
The Reader parameters allow redirection of the serial port and setting the serial port
parameter values. For a list of default values see the following paragraph, "Default Values".
22