Datalogic Scanning DS8100A 4 READING FEATURES

READING FEATURES 4
4 READING FEATURES
4.1 ADVANCED CODE RECONSTRUCTION (ACR™ 4)
The traditional way of barcode reading could be called “Linear Reading”. In this case, the
laser beam crosses the barcode symbol from its beginning to its end as shown in the
following figure:
Laser Beam
Figure 59 – Linear Reading
In Advanced Code Reconstruction mode it is no longer necessary for the laser beam to cross
the label from the start to the end. With just a set of partial scans on the label (obtained using
the motion of the label itself), the DS8100A is able to “reconstruct” the barcode. A typical set
of partial scans is shown in the figure below:
Code Direction
he alignment is performed by calculating the time difference from one partial scan to
another using a reference code element.
he most important parameter in Advanced Code Reconstruction is the value of the
Figure 60 – Partial Scans
None of the partial scans contains the whole label. The decoder aligns each partial scan
correctly and combines them in order to obtain the entire code.
T
4.1.1 Tilt Angle for Advanced Code Reconstruction
T
maximum tilt angle (α maximum) under which the code reconstruction process is still
possible.
Laser Beam
α = tilt angle
α
0° to
α
max
Figure 61 – Tilt Angle
53