READING FEATURES 4
By selecting the “PackTrack Calibration” option a further dialog box appears allowing to st
alibra n:
art
tioc
Position 1
Position 2
Position 3
Figure 67 – Performing the PackTrack™ Calibration
lative to the center of the code and enter them into
the corresponding edit boxes.
sition 2 and Position 3.
ation” button to validate the calibration settings.
efore closing the dialog box, press the Run Test button to test the calibration results and
1. Place the code at the desired position on the scan line (i.e. Position 1)
2. Measure the X, Y and Z coordinates re
3. Press the Calibrate button for Position 1 to start the calibration.
. Repeat the same procedure for Po4
5. Press the “Validate Calibr
B
efficiency.
NOTE
In the va
these ca
st ma s e n data are n sa Fo
e r t ti ro d
jority of yste
ms th x a
h
d z ot ne
u .
ces ry. r
ses s t x = 0, z= 0 du ing e calibra o pn ce re
57