INSTALLATION 3

3.6 TYPICAL LAYOUTS

The following typical layouts refer to system hardware configurations. However, they also
require the correct setup of the software configuration parameters. Dotted lines in the figures
refer to optional hardware configurations within the particular layout.

3.6.1 Point-to-Point

In this layout the data is transmitted to the Host on the Matrix-1000™ RS232 auxiliary serial
interface which is also used for reader configuration by running VisiSet™.
When One Shot or Phase Mode Operating mode is used, the reader is activated by an
External Trigger (photoelectric sensor) when the object enters its reading zone.
CAB-600X
CBOX-100
Matrix-1000™
P.S.*
Aux Interface Local Host
PG 6000
* External Trigger or Presence Sensor (for One Shot or Phase mode)
Figure 36 - Point-to-Point Layout
33