SOFTWARE CONFIGURATION 4
4 SOFTWARE CONFIGURATION
Software configuration of your Matrix-1000™ for static reading or simple code reading
applications can be accomplished by the Autolearning Procedure (which requires no external
configuration program or by using the VisiSet™ Autolearning Wizard for easy setup. These
procedures are described in chapter 1.
For all other applications, software configuration can be accomplished by VisiSet™ through
the Matrix-1000™ auxiliary serial port.
4.1 VISISET™ SYSTEM REQUIREMENTS
To install and run VisiSet™ you should have a Laptop or PC that meets or exceeds the
following:
• Pentium processor
• Win 95/98/2000, NT 4.0 or XP
• 32 MB Ram
• 5 MB free HD space
• one free RS232 serial port with 115 Kbaud
• SVGA board (800x600) or better using more than 256 colors
4.2 INSTALLING VISISET™
To install VisiSet™, proceed as follows:
1. Turn on the Laptop or PC that will be used for configuration (connected to the Matrix-
1000™ auxiliary port).
2. After Windows finishes booting, insert the CD-ROM provided.
3. Launch VisiSet™ installation by clicking Install.
4. Follow the instructions in the installation procedure.
35