Dazzle Multimedia None manual Inserting a Memory Stick Card

Inserting a Memory Stick Card

Before you insert a Memory Stick Card, be sure to place the Universal Reader/Writer in it’s base with the Dazzle logo on the right-hand side. If you plan on writing to or deleting from your Memory Stick card, make sure the card is not locked. The lock tab is located on the bottom of the card. To insert a Memory Stick Card, follow these steps:

1.Position the Memory Stick in the direction shown in the illustration below.

A portion of the left media slot is designed for inserting Memory Stick media cards. This portion utilizes the center of the media slot for Memory Stick insertion.

2.Insert the Memory Stick in the left media slot with the gold contacts facing to the right.

Important: Notice the rounded corner of the Memory Stick card and be careful not to insert the card in the wrong direction. To insert properly, be sure the card is positioned with the rounded corner on the bottom. You should see the gold contacts on the right side when inserting the media into the slot.

3.Gently push the Memory Stick in all the way until the card locks in place.

Caution: Insert the Memory Stick gently. If it is forced in, the reader/writer or the Memory Stick may be damaged, or data on the card may be lost or corrupted. If excessive force is required, or the card just doesn’t seem to fit, do not force the card in the reader. Contact the Dazzle Technical Resource Center for assistance.

Note: The secure mode of Sony MagicGate is not supported.

LOCK

Memory Stick

Note: The card’s rounded corner must be located at the bottom when inserting.

Dazzle Universal Reader/Writer User’s Guide • Using the Universal Reader/Writer • Page 24