USING THE ROTISSERIE

TO LIGHT THE ROTISSERIE BURNER:

The location of the rotis burner makes it more susceptible to strong wind conditions, more so than the protected grill burners. For this reason you should avoid operating the rotis during windy conditions. As an added safety feature we’ve equipped the burner with an automatic safety valve which will not allow gas to flow to the rotis burner unless the following conditions are present with the knob on:

1.The safety valve button is pressed, and held down.

2.The safety valve thermocouple has been sufficiently heated to keep safety valve open.

Open the lid. Push and hold the ignition button. You’ll hear a snapping sound. Turn the control knob to “HI”. Engage the safety valve button and continue to hold until the burner is lit. Once lit, turn control knob to desired setting. If the burner does not light within 4 to 5 seconds, release the safety valve button and turn the control knob to “OFF” and wait 5 minutes before trying again.

If relighting a hot burner, wait 5 minutes.

Never leave the control knob on if rotis is not in use.

Never light a grill burner under the rotis while rotisserie burner is lit.

MANUAL LIGHTING:

To manually light the rotisserie, place a butane lighter near the tip of the thermo- couple as shown in Fig. 31. Turn the control knob to “HI”. Hold the safety valve button in for about 4 to 5 seconds or until the burner remains lit. Once lit, turn control knob to desired setting. If the burner does not light within 4 or 5 seconds, release the safety valve button and turn the control knob to “OFF” and wait 5 minutes before trying again.

Thermocouple

WARNING:

FIG. 31

Keep hands and face away from front of burner! STAND TO THE SIDE WHEN LIGHTING. ONCE LIT MOVE HAND AWAY QUICKLY.

WARNING:

Electrical Grounding Instructions: This appliance (rotisserie motor) is equipped with a three-prong (grounding) plug for your protection against shock hazard and should be plugged directly into a properly grounded three-prong receptacle. Do not cut or remove the grounding prong from this plug.

The Rotisserie motor must be electrically grounded in accordance with local codes or, in the absence of local codes, with the National Electrical Code, ANSI/NFPA 70-1990. Keep the Rotisserie motor electric cord away from the heated surfaces of the grill. When not in use, remove and store the motor in a dry location.

21

Page 21 Page 23
Page 22
Image 22
DCS BGB30-BQR manual To Light the Rotisserie Burner, Manual Lighting
Page 21 Page 23

BGB30-BQR specifications

The DCS BGB30-BQR is a state-of-the-art gas monitoring and detection system, designed to ensure maximum safety and reliability in a variety of industrial environments. This advanced device integrates cutting-edge technologies and sophisticated features that make it a preferred choice for professionals in sectors such as oil and gas, manufacturing, and chemical processing.

At the heart of the BGB30-BQR lies its high-performance gas sensors, which are capable of detecting a wide range of hazardous gases including methane, propane, and hydrogen sulfide. These sensors utilize advanced electrochemical technology that allows for quick and accurate readings, ensuring that any potential gas leaks can be identified rapidly. The device is designed for real-time monitoring, providing continuous data to maintain safety in critical settings.

One of the standout features of the BGB30-BQR is its robust wireless communication capabilities. Equipped with built-in Bluetooth and Wi-Fi, the system allows for seamless integration into existing network infrastructures. This feature enables operators to access real-time data remotely via smartphones or tablets, empowering them to make informed decisions instantly. Additionally, the BGB30-BQR supports both local and cloud-based data storage, ensuring that historical data is available for analysis and regulatory compliance.

The BGB30-BQR is also built with durability in mind. Its rugged design meets tough environmental standards, making it suitable for both indoor and outdoor applications. With an IP68 rating, the device is resistant to dust and water ingress, ensuring longevity in challenging conditions.

Another significant characteristic of the BGB30-BQR is its user-friendly interface. The device comes with an intuitive LCD display that shows real-time gas level readings, battery status, and alerts for immediate troubleshooting. Furthermore, the device includes customizable alarm settings that can be tailored to suit specific operational requirements, ensuring prompt responses to any sign of danger.

In conclusion, the DCS BGB30-BQR gas monitoring system exemplifies innovation in safety technology. With its advanced sensing capabilities, robust communication features, durable construction, and user-friendly design, it stands out as a reliable solution for gas detection in various industrial applications. Investing in the BGB30-BQR not only enhances workplace safety but also boosts operational efficiency by providing critical data when it matters most.
Top Page Image Contents