DCS BGB30-BQR Cart Assembly Instructions, Tools Required not included, Before Assembling the Cart

CART ASSEMBLY INSTRUCTIONS

IMPORTANT:

THE CART MUST BE ASSEMBLED BEFORE ANY GAS CONNECTION CAN BE MADE.

TOOLS REQUIRED (not included):

Phillips Head Screwdriver. 7/16”Wrench or Socket, Protective Gloves To Be Worn

BEFORE ASSEMBLING THE CART:

STEP 1:

Remove packaging

a)Cut shrink wrap and banding material off.

b)Remove top cardboard tray and cardboard corners and then cut bottom tray to allow cart to be rolled out.

c)Recycle packaging.

STEP 2:

Remove side shelves and side trays from inside and discard bubble wrap.

STEP 3:

Part list included

Part No.		Description	Quantity
1)	10348	Bag, Hardware, Self adhesive	(1)
2)	17726	Assemby instructions BGB Cart	(1)
3)	15001-23	Machined Philip screws 10x24x1/2(Use for Step 5 and Step 6)	(5)
4)	15003-06	Hexbolt 1/4x20x1/2 (Use for Step 4)	(5)
5)	15021-09	Nut Hex 1/4–20 (Use for Step 4)	(5)
6)	15147	(1/4–20) 2” bolt (Use for Step 5)	(2)

STEP 4:

Attach the side shelf on the right side (left side is optional side burner location)

a)Attach shelf to the right side of the cart using 1/4 nuts and bolts provided [leave out (1) bolt as shown].

b)Do not tighten bolts (finger tight only) until completing Step 5-E.

Keps

nuts and

bolts

Leave this bolt out until Step 5

29