DCS BGB36, BGB48 installation instructions Ceramic Rods, Heat Shields

CARE AND MAINTENANCE

CERAMIC RODS:

It is not necessary to remove the ceramic rods for cleaning. They burn themselves clean during the next cooking operation. Periodically the trays holding the ceramic rods need to be turned over, and shaken free of debris for a thorough cleaning. How often you use the grill and the amount and type of food cooked will determine when it is necessary to clean the trays. If grease can be seen on the top of the tubes or if you get a lot of flare-up during cooking, the tubes need to be turned over and heated on “HI” for 30 minutes; longer for heavy soil.

HEAT SHIELDS:

These are located underneath the grill burners in the middle. Their purpose is to reflect heat back up towards the grates, preventing the drip pan from getting too hot. They should not need cleaning. If they need removed or put back in place (ie if they have moved in transit), please follow the following instructions:

Heat

then

shield

35