dCS 904 User Manual | Manual for Software Version 1.5x and 1.36 |
dCS Ltd | June 2000 |
|
|
Analogue Input Specifications
Balanced Inputs
|
|
|
|
|
Type |
|
| Balanced |
|
Format |
|
| AES14 : 1992 |
|
Impedance |
| + | 5 | kΩ |
|
| - | 5 | kΩ |
CMRR |
| 50 Hz | >100 | dB, spec |
|
| 50 Hz | >120 | dB, typ |
|
| 1 kHz | >108 | dB, typ |
|
| 10 kHz | >80 | dB, typ |
|
| 20 kHz | >74 | dB, typ |
Level for Full | Scale |
| +20 | dBu |
(as shipped) |
|
|
|
|
Trim range |
|
| ±6 | dB |
Connector type |
|
| XLR3 female |
|
Connections |
| Pin 1 | Ground or shield |
|
|
| Pin 2 | +Signal |
|
|
| Pin 3 |
|
Table 9 - Analogue XLR Interface Details
The analogue inputs are balanced (not floating) with a stable, high, common mode rejection ratio. Either input may be used on its own with the other floating if single ended operation is wanted.
Manual part no: DOC135904 iss 2B2 | Page 45 | 135904ma2b2.pdf file available from website |
Contact dCS on + 44 1799 531 999 | email to: more@dcsltd.co.uk |
(inside the UK replace + 44 with 0) | web site: www.dcsltd.co.uk |