dCS 904 User Manual | Manual for Software Version 1.5x and 1.36 |
dCS Ltd | June 2000 |
|
|
Power Consumption
The dCS 904 has a linear power supply, and so power consumption changes as the mains voltage changes. The internal regulation is comparatively efficient for a linear supply, so these changes are kept to a minimum. Power consumption is independent of mains voltage selector switch setting.
Power Consumption with Mains Voltage (measured as AC power into mains socket):Nominal mains | 25 W |
Mains | 22 W |
Mains +10% | 27 W |
The actual intended supply voltage is shown on the rear panel. 50 Hz or 60 Hz operation is not important – the unit can use either. In general, users will not need to change the mains input configuration. If you do need this to be done, please see the section "Having Your Options Changed”, page 68 in this manual and contact your distributor or dCS.
Size and Weight
The dCS 904 dimensions correspond to a standard 2U 19" rack mount case. Four heavy duty feet, fitted to the base, extend the overall height to slightly greater than 2U.
| Dimensions |
|
|
Width | 430 mm | see note (i) |
Height, without feet | 44 mm | (2U) |
Height, with feet | 52 mm |
|
Depth | 390 mm | see note (ii) |
Weight | 6.8 kg | see note (iii) |
note (i) | Removable 19" rack mount ears are supplied, | |
| taking total width to 483 mm (19"). | |
note (ii) | Measured from front panel to rear panel | |
| connectors. Additional depth should be allowed to | |
| accommodate cable connectors. | |
note (iii) | The high quality case is necessarily heavy, | |
| consideration should be paid to appropriate support | |
| shelving when installing the units in a rack. | |
Manual part no: DOC135904 iss 2B2 | Page 62 | 135904ma2b2.pdf file available from website |
Contact dCS on + 44 1799 531 999 | email to: more@dcsltd.co.uk |
(inside the UK replace + 44 with 0) | web site: www.dcsltd.co.uk |